AJU-X200 Sixteen-Element Anti-Jamming GNSS Antenna

$0.00

A 16-element anti-jamming GNSS antenna with built-in receiver for BDS B1 / GPS L1 / Galileo E1 signals, suppressing up to 15 jammers (single jammer: j/s ≥ 110 db) and outputting both PVT solutions and a protected RF output.

Category: CRPA & Anti-Jamming

Description
Reviews (0)

Description

The AJU-X200 Sixteen-Element Anti-Jamming GNSS Antenna is a navigation anti-jamming antenna that integrates a multi-element controlled reception pattern antenna (CRPA) array, an anti-jamming processing module and a built-in GNSS receiver in a single unit. It supports reception, amplification, down-conversion, filtering, anti-jamming processing and up-converted RF output of 16-channel BDS B1 / GPS L1 / Galileo E1 signals. Using adaptive spatial-domain filtering, it suppresses 1–15 jammers from different directions, including wideband, narrowband, frequency-sweep and pulse jamming, and combinations thereof, over a spatial coverage of Azimuth 0°–360°, elevation -10°–90°. The built-in receiver performs PVT (position, velocity, time) solving and outputs positioning results (Horizontal ≤ 7 m, vertical ≤ 9 m (95%, PDOP ≤ 4); velocity ≤ 0.2 m/s (95%)) through the data interface, while a processed RF output (-55 dBm to -70 dBm, 50 Ω, VSWR ≤ 2.0) is available for external GNSS receivers. The antenna port withstands RF input of ≥ 10 W. The unit is rated for operation from -40 °C to +70 °C (10%–90% RH, non-condensing) with storage from -45 °C to +85 °C (10%–95% RH, non-condensing) and an ingress protection of ≥ IP65, and is qualified with shock (Tested per ISO 19453-3:2018) and vibration (Tested per ISO 5309:2023) testing per civil UAV environmental test standards. Installation notes require the metallic base to be mounted against a good heat-dissipating surface and the antenna face to have an unobstructed view of the sky; when installed inside a platform, the radome-side surface must be RF-transparent (≥92% transmission in the L band).

Key specifications: Array Type: 16-element CRPA array; Channels: 16; Supported Bands: BDS B1 / GPS L1 / Galileo E1; Jamming Types Suppressed: Wideband, narrowband, frequency-sweep and pulse jamming, and combinations thereof; Number of Jammers Suppressed: 1–15; Anti-Jamming Capability (J/S @ -130 dBm): Single jammer: J/S ≥ 110 dB; Seven jammers: J/S ≥ 100 dB; Fifteen jammers: J/S ≥ 80 dB (all @ -130 dBm).

Specifications

Parameter	Value	Unit
Array Type	16-element CRPA array
Channels	16
Supported Bands	BDS B1 / GPS L1 / Galileo E1
Jamming Types Suppressed	Wideband, narrowband, frequency-sweep and pulse jamming, and combinations thereof
Number of Jammers Suppressed	1–15
Anti-Jamming Capability (J/S @ -130 dBm)	Single jammer: J/S ≥ 110 dB; Seven jammers: J/S ≥ 100 dB; Fifteen jammers: J/S ≥ 80 dB (all @ -130 dBm)
Jamming Suppression Spatial Range	Azimuth 0°–360°, elevation -10°–90°
RF Output Power	-55 dBm to -70 dBm
RF Impedance	50 Ω
Output VSWR	≤ 2.0
Built-in Receiver Position Accuracy	Horizontal ≤ 7 m, vertical ≤ 9 m (95%, PDOP ≤ 4)
Built-in Receiver Velocity Accuracy	≤ 0.2 m/s (95%)
Built-in Receiver Output	NMEA GGA, GSV, RMC, VTG, ZDA; update rate 5 Hz; baud rate 115200
Antenna Port Burnout Resistance	≥ 10 W
Dimensions	200 × 200 × 26 mm (±0.5 mm, without heatsink); 200 × 200 × 42 mm (±0.5 mm, with heatsink)
Weight	≤ 1200 g (without heatsink); ≤ 2100 g (with heatsink)
Power Consumption	≤ 35 W
Supply Voltage	DC 12–36 V
Interface	J30J-15ZKP (15-pin) + SMA-K RF output
Signal Level	LVTTL (3.3 V) default, RS422 optional
Data Interface	GNSS receiver output: 5 Hz, 115200 bps, NMEA (GGA/GSV/RMC/VTG/ZDA)
Operating Temperature	-40 °C to +70 °C (10%–90% RH, non-condensing)
Storage Temperature	-45 °C to +85 °C (10%–95% RH, non-condensing)
Ingress Protection	≥ IP65
Shock Test	Tested per ISO 19453-3:2018
Vibration Test	Tested per ISO 5309:2023
Mounting	8 × M3