Description
The DZT1-40 is a single-axis platform-type multi-function test turntable for functional testing of inertial systems and inertial components. Multi-mode test equipment for inertial systems, sensors and electro-optical payloads.
The DZT1-40 is a single-axis platform-type multi-function test turntable for functional testing of inertial systems and inertial components. It offers position, rate and rocking modes and is driven by an industrial control computer, giving high-accuracy positioning, smooth rate control and low waveform distortion. Functional and calibration testing of inertial systems, gyroscopes and accelerometers. The equipment uses an industrial control computer for motion control with direct-drive torque motors and inductosyn or grating angle feedback (where applicable), providing high-accuracy positioning, stable rates, low waveform distortion and high repeatability. Customization is available on request. All specifications are transcribed from the manufacturer’s product brochure.
Key specifications: Load Capacity: 50 kg; Table Top Runout: 0.015 mm; Tilt Rotation Error: 2″; Operating Modes: Position, rate, rocking; Slip Ring: User-defined slipways (custom rings and power); Angular Position Measurement Accuracy: ±1″.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Load Capacity | 50 kg | |
| Table Top Runout | 0.015 mm | |
| Tilt Rotation Error | 2″ | |
| Operating Modes | Position, rate, rocking | |
| Slip Ring | User-defined slipways (custom rings and power) | |
| Angular Position Measurement Accuracy | ±1″ | |
| Angular Position Resolution | 0.36″ | |
| Angular Position Repeatability | ±1″ | |
| Rate Range | 0.001°/s to 1500°/s | |
| Rate Accuracy and Stability | 1×10⁻³ (1° average); 1×10⁻⁴ (10° average); 1×10⁻⁵ (360° average) | |
| Maximum Angular Acceleration | 500°/s² | |
| Typical Loads | 10 kg, 50 kg |
All specifications are taken from the manufacturer’s current datasheet.
Reviews
There are no reviews yet.