Description
The DZT2-50A(B) is a two-axis U-T / U-O structure multi-function simulation test turntable with position, rate, rocking, servo and simulation modes for functional testing of inertial systems, inertial components and optical products.. Multi-mode test equipment for inertial systems, sensors and electro-optical payloads.
The DZT2-50A(B) is a two-axis U-T / U-O structure multi-function simulation test turntable with position, rate, rocking, servo and simulation modes for functional testing of inertial systems, inertial components and optical products. Functional testing of inertial systems, inertial components and optical products. The equipment uses an industrial control computer for motion control with direct-drive torque motors and inductosyn or grating angle feedback (where applicable), providing high-accuracy positioning, stable rates, low waveform distortion and high repeatability. Customization is available on request. All specifications are transcribed from the manufacturer’s product brochure.
Key specifications: Load Capacity: 50 kg; Load Dimensions: Φ500 × 500 mm; Table Top Diameter: Φ530 mm; Table Top Runout: 0.015 mm; Tilt Rotation Error: ±2″; Axis Perpendicularity: ±3″.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Load Capacity | 50 kg | |
| Load Dimensions | Φ500 × 500 mm | |
| Table Top Diameter | Φ530 mm | |
| Table Top Runout | 0.015 mm | |
| Tilt Rotation Error | ±2″ | |
| Axis Perpendicularity | ±3″ | |
| Rotation Range | Continuous, unlimited | |
| Operating Modes | Position, rate, rocking | |
| Slip Ring | User-defined slipways (custom rings and power) | |
| Ambient Temperature | 20 °C ± 5 °C | |
| Angular Position Measurement Accuracy | ±0.5″ | |
| Angular Position Resolution | 0.36″ | |
| Angular Position Repeatability | ±0.3″ | |
| Rate Range | Inner axis ±0.001°/s to ±600°/s; outer axis ±0.001°/s to ±300°/s | |
| Rate Resolution | 0.0001°/s | |
| Rate Accuracy and Stability | 1×10⁻³ (1° average); 1×10⁻⁴ (10° average); 1×10⁻⁵ (360° average) | |
| Maximum Acceleration | Inner axis 100°/s²; outer axis 100°/s² | |
| Typical Loads | 30 kg, 45 kg, 50 kg, 60 kg |
All specifications are taken from the manufacturer’s current datasheet.
Reviews
There are no reviews yet.