Description
The DZT2-300SX is flange-mounted on the lift rod of a rail cart and automatically adjusts the test azimuth and attitude of the device under test, mainly for acoustic-system product testing.. Multi-mode test equipment for inertial systems, sensors and electro-optical payloads.
The DZT2-300SX is flange-mounted on the lift rod of a rail cart and automatically adjusts the test azimuth and attitude of the device under test, mainly for acoustic-system product testing. Testing and experimentation of underwater acoustic system products. The equipment uses an industrial control computer for motion control with direct-drive torque motors and inductosyn or grating angle feedback (where applicable), providing high-accuracy positioning, stable rates, low waveform distortion and high repeatability. Customization is available on request. All specifications are transcribed from the manufacturer’s product brochure.
Key specifications: Motion: Pitch ±10°; roll ±180°; Pitch/Roll Control Error: ≤ 0.1°; Load Capacity: ≥ 300 kg; Working Depth: ≥ 10 m; Maximum Angular Speed: ≥ 720°/min; Minimum Angular Speed: ≤ 30°/min.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Motion | Pitch ±10°; roll ±180° | |
| Pitch/Roll Control Error | ≤ 0.1° | |
| Load Capacity | ≥ 300 kg | |
| Working Depth | ≥ 10 m | |
| Maximum Angular Speed | ≥ 720°/min | |
| Minimum Angular Speed | ≤ 30°/min | |
| Angular Speed | Continuously settable | |
| Total Weight | ≤ 500 kg | |
| Communication Ports | 1 × RS-422 bus, 1 × Ethernet | |
| Locking | Locking function keeps the mounting face stationary during UUT installation | |
| Emergency Stop | E-stop function for immediate shutdown | |
| Control Unit | Membrane keypad and LCD for mode selection and angle display |
All specifications are taken from the manufacturer’s current datasheet.
Reviews
There are no reviews yet.