Description
The DZT5-70 uses a gantry structure combining a three-axis turntable with a two-axis turntable. Multi-mode test equipment for inertial systems, sensors and electro-optical payloads.
The DZT5-70 uses a gantry structure combining a three-axis turntable with a two-axis turntable. The three-axis part offers position, rate, rocking, servo and simulation modes; the two-axis part simulates spatial two-dimensional (azimuth, elevation) rotation of a target, enabling inertial-system test development with relative motion. Inertial-system test development requiring target-relative motion simulation. The equipment uses an industrial control computer for motion control with direct-drive torque motors and inductosyn or grating angle feedback (where applicable), providing high-accuracy positioning, stable rates, low waveform distortion and high repeatability. Customization is available on request. All specifications are transcribed from the manufacturer’s product brochure.
Key specifications: Load Capacity: 70 kg (unit under test), 35 kg (simulated target); UUT Installation Space: 500 × 500 mm; Tilt Rotation Error: 10″; Five-Axis Non-Perpendicularity: ≤ 10″; Five-Axis Non-Intersection: ≤ 1 mm; Rotation Range: Outer axis continuous/unlimited; inner and middle axes ±30°.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Load Capacity | 70 kg (unit under test), 35 kg (simulated target) | |
| UUT Installation Space | 500 × 500 mm | |
| Tilt Rotation Error | 10″ | |
| Five-Axis Non-Perpendicularity | ≤ 10″ | |
| Five-Axis Non-Intersection | ≤ 1 mm | |
| Rotation Range | Outer axis continuous/unlimited; inner and middle axes ±30° | |
| Operating Modes | Position, speed, rocking | |
| Slip Ring | User-defined slipways (custom rings and power) | |
| Angular Position Measurement Accuracy | ±7″ | |
| Angular Position Resolution | 0.36″ | |
| Angular Position Repeatability | ±1″ | |
| Angular Position Control Accuracy | ±10″ | |
| Rate Range | Three-axis part: ±0.001°/s to ±200°/s on all axes; two-axis part: inner ±0.001°/s to ±90°/s, outer ±0.001°/s to ±80°/s | |
| Maximum Acceleration | Three-axis part: inner 500°/s², middle 300°/s², outer 200°/s²; two-axis part: inner 150°/s², outer 100°/s² |
All specifications are taken from the manufacturer’s current datasheet.
Reviews
There are no reviews yet.