Description
The WKZT1-40 is a single-axis turntable with an integrated temperature chamber, providing multi-function simulation testing of inertial devices in high/low-temperature environments with position, rate, rocking, servo, simulation and thermal-test modes.. Multi-mode test equipment for inertial systems, sensors and electro-optical payloads.
The WKZT1-40 is a single-axis turntable with an integrated temperature chamber, providing multi-function simulation testing of inertial devices in high/low-temperature environments with position, rate, rocking, servo, simulation and thermal-test modes. High/low-temperature testing of inertial systems and inertial components. The equipment uses an industrial control computer for motion control with direct-drive torque motors and inductosyn or grating angle feedback (where applicable), providing high-accuracy positioning, stable rates, low waveform distortion and high repeatability. Customization is available on request. All specifications are transcribed from the manufacturer’s product brochure.
Key specifications: Load Capacity: 40 kg; Load Dimensions: Φ400 × 400 mm; Table Top Diameter: Φ430 mm; Table Flatness: 0.01 mm; Table End-Runout: 0.02 mm; Table Magnetic Leakage: ≤ 1 Gs (10 mm above table).
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Load Capacity | 40 kg | |
| Load Dimensions | Φ400 × 400 mm | |
| Table Top Diameter | Φ430 mm | |
| Table Flatness | 0.01 mm | |
| Table End-Runout | 0.02 mm | |
| Table Magnetic Leakage | ≤ 1 Gs (10 mm above table) | |
| Tilt Rotation Error | ±2″ | |
| Rotation Range | Continuous, unlimited | |
| Operating Modes | Position, rate, rocking | |
| Slip Ring | User-defined slipways (custom rings and power) | |
| Angular Position Measurement Accuracy | ±1″ | |
| Angular Position Resolution | 0.36″ | |
| Angular Position Repeatability | ±1″ | |
| Rate Range | ±0.001°/s to 1500°/s | |
| Rate Accuracy and Stability | 1×10⁻³ (1° average); 1×10⁻⁴ (10° average); 1×10⁻⁵ (360° average) | |
| Maximum Acceleration | 500°/s² | |
| Temperature Chamber Inner Dimensions | 500 × 500 × 500 mm (W×D×H) | |
| Temperature Range | -55 °C to +125 °C | |
| Temperature Control Accuracy and Uniformity | ±1 °C (empty chamber) | |
| Temperature Ramp Rate | 3 °C/min | |
| Typical Loads | 30 kg, 40 kg, 45 kg, 60 kg |
All specifications are taken from the manufacturer’s current datasheet.
Reviews
There are no reviews yet.