Description
The WKZT2-30 is a two-axis U-T structure multi-function simulation test turntable with position, rate, rocking and high/low-temperature test modes, driven by an industrial control computer for high-accuracy positioning, smooth rate and low waveform distortion.. Multi-mode test equipment for inertial systems, sensors and electro-optical payloads.
The WKZT2-30 is a two-axis U-T structure multi-function simulation test turntable with position, rate, rocking and high/low-temperature test modes, driven by an industrial control computer for high-accuracy positioning, smooth rate and low waveform distortion. High/low-temperature testing of inertial systems and inertial components. The equipment uses an industrial control computer for motion control with direct-drive torque motors and inductosyn or grating angle feedback (where applicable), providing high-accuracy positioning, stable rates, low waveform distortion and high repeatability. Customization is available on request. All specifications are transcribed from the manufacturer’s product brochure.
Key specifications: Load Capacity: 30 kg; Load Dimensions: 500 × 500 × 500 mm; Table Top Diameter: Φ530 mm; Table Top Runout: 0.02 mm; Tilt Rotation Error: ±2″; Axis Perpendicularity: ±3″.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Load Capacity | 30 kg | |
| Load Dimensions | 500 × 500 × 500 mm | |
| Table Top Diameter | Φ530 mm | |
| Table Top Runout | 0.02 mm | |
| Tilt Rotation Error | ±2″ | |
| Axis Perpendicularity | ±3″ | |
| Rotation Range | Continuous, unlimited | |
| Operating Modes | Position, rate, rocking | |
| Slip Ring | User-defined slipways (custom rings and power) | |
| Angular Position Measurement Accuracy | ±1″ | |
| Angular Position Resolution | 0.36″ | |
| Angular Position Repeatability | ±1″ | |
| Rate Range | Inner ±0.001°/s to ±600°/s; outer ±0.001°/s to ±300°/s | |
| Rate Accuracy and Stability | 1×10⁻³ (1° average); 1×10⁻⁴ (10° average); 1×10⁻⁵ (360° average) | |
| Maximum Acceleration | Inner 600°/s²; outer 200°/s² | |
| Temperature Chamber Inner Dimensions | 550 × 600 × 520 mm (W×D×H, effective height ≥ 420 mm) | |
| Temperature Range | -55 °C to +125 °C | |
| Temperature Control Accuracy and Uniformity | ±1 °C | |
| Temperature Ramp Rate | 3 °C/min | |
| Body Weight | approx. 700 kg | |
| Typical Loads | 30 kg, 45 kg, 60 kg |
All specifications are taken from the manufacturer’s current datasheet.
Reviews
There are no reviews yet.