Description
The WDZT1-50 is a horizontal (vertical-axis) single-axis rate table. Multi-mode test equipment for inertial systems, sensors and electro-optical payloads.
The WDZT1-50 is a horizontal (vertical-axis) single-axis rate table. Parameters and operating modes are set through computer software to provide accurate angular rate and angular position for testing and calibration of inertial components such as accelerometers. Testing and calibration of accelerometers and other inertial components. The equipment uses an industrial control computer for motion control with direct-drive torque motors and inductosyn or grating angle feedback (where applicable), providing high-accuracy positioning, stable rates, low waveform distortion and high repeatability. Customization is available on request. All specifications are transcribed from the manufacturer’s product brochure.
Key specifications: Load Capacity: 40 kg; Flatness: 0.01 mm; Table Top Diameter: Φ420 mm; Table Top Runout: 0.01 mm (Φ400 mm); Tilt Rotation Error: ±1″; Operating Modes: Position, rate, rocking.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Load Capacity | 40 kg | |
| Flatness | 0.01 mm | |
| Table Top Diameter | Φ420 mm | |
| Table Top Runout | 0.01 mm (Φ400 mm) | |
| Tilt Rotation Error | ±1″ | |
| Operating Modes | Position, rate, rocking | |
| Slip Ring | User-defined slipways (custom rings and power) | |
| Angular Position Measurement Accuracy | ±0.5″ | |
| Angular Position Resolution | 0.36″ | |
| Angular Position Repeatability | ±0.3″ | |
| Rate Range | 0.001°/s to 1500°/s | |
| Rate Accuracy and Stability | 1×10⁻³ (1° average); 1×10⁻⁴ (10° average); 1×10⁻⁵ (360° average) | |
| Maximum Acceleration | 800°/s² | |
| Typical Loads | 30 kg, 40 kg, 45 kg, 60 kg |
All specifications are taken from the manufacturer’s current datasheet.
Reviews
There are no reviews yet.